TP-Link Tapo C420S4 Smart Wire-Free Security Camera System, 4-Camera System

SKU: 125967

2K QHD-Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.
180-Day Battery Life-The rechargeable and removable battery with a low-power protocol extends your usage.*
Full-Colour Night Vision-Reveal high-fidelity details and colour at night with the starlight sensor.
Smart AI Detection and Notification-Smart AI identifies people, pets, and cars, notifying users as needed.
Wire-Free Placement-No wires means you can place the cameras almost anywhere inside or outside-whatever works for you!
Light and Sound Alarm-Triggers sound and light as an alarm when motion is detected.
Two-Way Audio-Enables communication through a built-in microphone and speaker.
Flexible Storage Choices-Save recorded videos on the hub-installed microSD card^† (up to 512 GB) or by using Tapo Care^‡cloud storage services.
IP65 Water&Dust Resistant-Offers excellent waterproof and dustproof performance for outdoor scenarios.

(125967)

CAMERA
Image Sensor	1/3” Progressive Scan CMOS Starlight Sensor
Lens	Focal Length: 3.2 mm
	Aperture: F1.6
	Field of View: 113° (Diagonal), 97°(Horizontal), 54°(Vertical)
Night Vision	850 nm IR LED (49 ft / 15 m)
Night Vision	Full-Color Night Vision
Lighting	2× Built-in Spotlights
Interface & Button	1× SYNC/RESET Button
Hub Compatibility	Compatible with Tapo H200 (Included)
HUB
Device Compatibility	Works with Tapo smart sensors, buttons, Sub-1G switches, cameras, and video doorbells.
Device Compatibility	All Supported Products>
Connection Capacity	Up to 64 Sub-1G switches, sensors, or buttons + 4 cameras or video doorbells
Interface & Button	1× Ethernet Port
	1× RESET Button
	1× SYNC Button
	1× MicroSD Card Slot (Up to 512 GB)
VIDEO & AUDIO
Maximum Resolution	2K QHD 4MP (2560 × 1440 px)
Frame Rate	15 fps / 20 fps
Digital Zoom	12×
Video Compression	H.264
Live View	Yes
Image Enhancement	3DNR
Image Enhancement	WDR
Audio Input & Output	Built-in Microphone and Speaker
Audio Communication	Two-Way Audio with Noise Cancellation
Siren Volume	Camera:
	92 dB (Level measured at 4-inch/10-cm distance)
	Hub:
	100 dB (Level measured at 4-inch/10-cm distance)
STORAGE
Local Storage	MicroSD Card Slot on Hub (Up to 512 GB)
Local Storage	General Information about using MicroSD Cards >
Cloud Storage	Tapo Care Cloud Storage Services (Subscription required)
DETECTION AND NOTIFICATIONS
Sensor	Single Motion Sensor (FOV: 110° horizontal)
Sensor	Single Ambient Light Sensors
AI Detection	Motion Detection
	Person Detection
	Pet Detection
	Vehicle Detection
Activity Zones	Yes
Output Notification	System Notification
Output Notification	System Notification with Snapshot (Tapo Care Services)
NETWORK
Network Connectivity	Connect via Wi-Fi or Ethernet
Wireless Connectivity	IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
Wireless Connectivity	Sub-1G, 922MHz (Used for local connection between camera and hub)
Ethernet Port	1× 10/100 Mbps RJ45 Port on Hub
SECURITY
Security	128-bit AES Encryption with SSL/TLS
Security	WPA/WPA2-PSK
POWER
Power Source	Hub：
	9V DC Power Adapter

	Camera：
	6700 mAh Removable Rechargeable Lithium-ion Battery
	Optional Solar Panel: Tapo A200 (Sold separately)
Input Voltage	Camera Battery Pack Adapter Input: 100-240 V, 50/60 Hz
Input Voltage	Hub Adapter Input: 100-240 V, 50/60 Hz, 0.3 A
Output Voltage	Camera Battery Pack Adapter Output: 5.0 V, 1.0 A
Output Voltage	Hub Adapter Output: 9.0 V, 0.85 A
GENERAL
Smart Integration	Google Assistant, Amazon Alexa
Weather Resistance	Camera: IP65
System Requirements	Tapo App: iOS 11.0 or higher, Andriod 5.0 or higher
Mounting Options	Tabletop
	Ceiling-Mounted
	Wall-Mounted
Operating Temperature	Camera: -20℃~45℃
Operating Temperature	Hub: 0℃~40℃
Storage Temperature	-20℃~60℃
Operating Humidity	10%~90% RH, Non-condensing
Storage Humidity	5%~90% RH, Non-condensing
Charging Temperature	0-55℃
Dimensions	Camera Dimensions: 4.35 × 2.52 × 2.52 in (110.6 × 64.2 × 64.2 mm)
Dimensions	Hub Dimensions: 2.8 × 2.8 × 1.2 in (71.45 × 71.45 × 31.25 mm)
Package Contents	Tapo C420 Cameras
	Tapo A100 Batteries
	Tapo H200 Hub
	USB Adapter
	USB Adapter Cable
	DC Power Adapter
	Mounting Anchors
	Mounting Screws
	Mounting Templates
	Camera Brackets
	Quick Start Guide
	RJ45 Ethernet Cable
Certifications	FCC, RoHS

SKU	125967
Model #	Tapo C420S4
Barcode #	4895252501919
Brand	TP-LINK
Shipping Weight	2.1100kg
Shipping Width	0.280m
Shipping Height	0.100m
Shipping Length	0.370m

Be The First To Review This Product!

Help other OnLine Centre Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

2K QHD-Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.
180-Day Battery Life-The rechargeable and removable battery with a low-power protocol extends your usage.*
Full-Colour Night Vision-Reveal high-fidelity details and colour at night with the starlight sensor.
Smart AI Detection and Notification-Smart AI identifies people, pets, and cars, notifying users as needed.
Wire-Free Placement-No wires means you can place the cameras almost anywhere inside or outside-whatever works for you!
Light and Sound Alarm-Triggers sound and light as an alarm when motion is detected.
Two-Way Audio-Enables communication through a built-in microphone and speaker.
Flexible Storage Choices-Save recorded videos on the hub-installed microSD card^† (up to 512 GB) or by using Tapo Care^‡cloud storage services.
IP65 Water&Dust Resistant-Offers excellent waterproof and dustproof performance for outdoor scenarios.

CAMERA
Image Sensor	1/3” Progressive Scan CMOS Starlight Sensor
Lens	Focal Length: 3.2 mm
	Aperture: F1.6
	Field of View: 113° (Diagonal), 97°(Horizontal), 54°(Vertical)
Night Vision	850 nm IR LED (49 ft / 15 m)
Night Vision	Full-Color Night Vision
Lighting	2× Built-in Spotlights
Interface & Button	1× SYNC/RESET Button
Hub Compatibility	Compatible with Tapo H200 (Included)
HUB
Device Compatibility	Works with Tapo smart sensors, buttons, Sub-1G switches, cameras, and video doorbells.
Device Compatibility	All Supported Products>
Connection Capacity	Up to 64 Sub-1G switches, sensors, or buttons + 4 cameras or video doorbells
Interface & Button	1× Ethernet Port
	1× RESET Button
	1× SYNC Button
	1× MicroSD Card Slot (Up to 512 GB)
VIDEO & AUDIO
Maximum Resolution	2K QHD 4MP (2560 × 1440 px)
Frame Rate	15 fps / 20 fps
Digital Zoom	12×
Video Compression	H.264
Live View	Yes
Image Enhancement	3DNR
Image Enhancement	WDR
Audio Input & Output	Built-in Microphone and Speaker
Audio Communication	Two-Way Audio with Noise Cancellation
Siren Volume	Camera:
	92 dB (Level measured at 4-inch/10-cm distance)
	Hub:
	100 dB (Level measured at 4-inch/10-cm distance)
STORAGE
Local Storage	MicroSD Card Slot on Hub (Up to 512 GB)
Local Storage	General Information about using MicroSD Cards >
Cloud Storage	Tapo Care Cloud Storage Services (Subscription required)
DETECTION AND NOTIFICATIONS
Sensor	Single Motion Sensor (FOV: 110° horizontal)
Sensor	Single Ambient Light Sensors
AI Detection	Motion Detection
	Person Detection
	Pet Detection
	Vehicle Detection
Activity Zones	Yes
Output Notification	System Notification
Output Notification	System Notification with Snapshot (Tapo Care Services)
NETWORK
Network Connectivity	Connect via Wi-Fi or Ethernet
Wireless Connectivity	IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
Wireless Connectivity	Sub-1G, 922MHz (Used for local connection between camera and hub)
Ethernet Port	1× 10/100 Mbps RJ45 Port on Hub
SECURITY
Security	128-bit AES Encryption with SSL/TLS
Security	WPA/WPA2-PSK
POWER
Power Source	Hub：
	9V DC Power Adapter

	Camera：
	6700 mAh Removable Rechargeable Lithium-ion Battery
	Optional Solar Panel: Tapo A200 (Sold separately)
Input Voltage	Camera Battery Pack Adapter Input: 100-240 V, 50/60 Hz
Input Voltage	Hub Adapter Input: 100-240 V, 50/60 Hz, 0.3 A
Output Voltage	Camera Battery Pack Adapter Output: 5.0 V, 1.0 A
Output Voltage	Hub Adapter Output: 9.0 V, 0.85 A
GENERAL
Smart Integration	Google Assistant, Amazon Alexa
Weather Resistance	Camera: IP65
System Requirements	Tapo App: iOS 11.0 or higher, Andriod 5.0 or higher
Mounting Options	Tabletop
	Ceiling-Mounted
	Wall-Mounted
Operating Temperature	Camera: -20℃~45℃
Operating Temperature	Hub: 0℃~40℃
Storage Temperature	-20℃~60℃
Operating Humidity	10%~90% RH, Non-condensing
Storage Humidity	5%~90% RH, Non-condensing
Charging Temperature	0-55℃
Dimensions	Camera Dimensions: 4.35 × 2.52 × 2.52 in (110.6 × 64.2 × 64.2 mm)
Dimensions	Hub Dimensions: 2.8 × 2.8 × 1.2 in (71.45 × 71.45 × 31.25 mm)
Package Contents	Tapo C420 Cameras
	Tapo A100 Batteries
	Tapo H200 Hub
	USB Adapter
	USB Adapter Cable
	DC Power Adapter
	Mounting Anchors
	Mounting Screws
	Mounting Templates
	Camera Brackets
	Quick Start Guide
	RJ45 Ethernet Cable
Certifications	FCC, RoHS